one.A connecting link of an O-ring Chain for standard application is pre-coated with grease on the pins. Prior to connection, confirm the grease about the surfaces of pins, and in the event the amount of grease is tiny, apply grease with bare hands. (If gloves are utilised, the grease will probably be absorbed by the gloves.)
Example: When the connecting hyperlink (I) of an O-ring chain for standard application is
shipped, O-rings are fitted at the roots on the pins. Should the O-rings come loose on account of vibration all through transport, refit the O-rings in towards the roots on the pins.
In this case, make sure to return the grease collected at the roots on the pins for the central surfaces of your pins, far more at portion A than at portions B proven during the over illustration. (Portions A is worn because of sliding using the bushings.)
2.The chain is often most conveniently connected within the teeth of a sprocket. Engage the backlinks at the two ends on the chain with all the sprocket teeth and fit connecting pins. When the sprocket can be moved, the chain may also be linked about the loosened side.
three. Connecting process
1.Confirm that O-rings are attached to your roots in the pins.
2.In the event the level of grease utilized within the connecting pins is compact, coat the pins with grease in the central portions.
3.Insert the connecting pins to the bushings with the inner hyperlinks at the two ends.
four.Verify the grease is utilized on the complete face of the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins into the connecting plate and even though pressing the connecting plate, install the spring clip. Verify whether or not the head (the end with no split) on the spring clip is turned while in the feeding path of your chain. (See the next illustration.)
6.Be sure you confirm that the spring clip is securely fitted in the clip grooves in the connecting 
pins.
This completes jointing in the connecting website link. Note that grease on the surfaces of connecting pins and O-rings can be removed for the duration of installation do the job. In this case, re-grease employing the grease on the surface in the base chain or the grease in the polyethylene bag during which the connecting website link was contained.
